Remove/install engine hood clamping lever - AR91.60-P-0920EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204.3, 207, 212 with CODE (U60) Pedestrian protection
Shown on model 212
| Remove/install | |||
| Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | AS00.00-Z-0011-01A | |
| Risk of injury caused by body parts being pinched or crushed when working on gas-filled struts under tension | Only remove and install gas-filled struts when they are not under tension and when the components are properly secured. | AS00.00-Z-0012-01A | |
| 1 | Open lock (1) at clamping lever (2) | ||
| 2 | Remove clamping lever (2) from engine hood hinge (3) | ||
| 3 | Install in the reverse order |