Test values for gear set - BE27.50-P-1000-01A
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION 724.2
TRANSMISSION 722.3/5/6/7/9
CHECK VALUES FOR GEAR SET
| Number | Designation | TRANSMISSION 722.3 | TRANSMISSION 722.5 | |
|---|---|---|---|---|
| BE27.50-P-1001-01A | Axial play between output shaft and intermediate shaft | mm | - | 0, 1 |
| BE27.50-P-1002-01A | Axial play between output shaft and rear cover | mm | - | 0, 4 |
| BE27.50-P-1003-01A | Axial play between freewheel and connecting member | mm | 0, 05...0, 2 | 0, 05...0, 2 |
| BE27.50-P-1004-01A | End play between park pawl gear and grooved ball bearing | mm | 0, 4...0, 5 | - |
| BE27.50-P-1005-01A | Axial play between shim and retaining ring | mm | - | - |
| BE27.50-P-1006-01A | Axial play between input shaft and transmission housing | mm | - | - |
| BE27.50-P-1007-01A | Axial play between output shaft and transmission housing | mm | - | - |
| BE27.50-P-1008-01A | Axial play between countershaft and transmission housing | mm | - | - |
| BE27.50-P-1009-01A | Axial play between reverse gear shaft and transmission housing | mm | - | - |
| BE27.50-P-1010-01A | Preload of tapered roller bearings from differential | mm | - | - |
CHECK VALUES FOR GEAR SET
| Number | Designation | TRANSMISSION 722.6 | TRANSMISSION 722.7 | |
|---|---|---|---|---|
| BE27.50-P-1001-01A | Axial play between output shaft and intermediate shaft | mm | - | - |
| BE27.50-P-1002-01A | Axial play between output shaft and rear cover | mm | - | - |
| BE27.50-P-1003-01A | Axial play between freewheel and connecting member | mm | - | - |
| BE27.50-P-1004-01A | End play between park pawl gear and grooved ball bearing | mm | 0, 3...0, 5 | - |
| BE27.50-P-1005-01A | Axial play between shim and retaining ring | mm | 0, 15...0, 6 | - |
| BE27.50-P-1006-01A | Axial play between input shaft and transmission housing | mm | - | 0, 15...0, 3 |
| BE27.50-P-1007-01A | Axial play between output shaft and transmission housing | mm | - | 0, 25...0, 4 |
| BE27.50-P-1008-01A | Axial play between countershaft and transmission housing | mm | - | 0, 25...0, 4 |
| BE27.50-P-1009-01A | Axial play between reverse gear shaft and transmission housing | mm | - | 0, 35...0, 5 |
| BE27.50-P-1010-01A | Preload of tapered roller bearings from differential | mm | - | 0, 26 |
CHECK VALUES FOR GEAR SET
| Number | Designation | TRANSMISSION 722.9 | TRANSMISSION 724.2 | |
|---|---|---|---|---|
| BE27.50-P-1001-01A | Axial play between output shaft and intermediate shaft | mm | - | - |
| BE27.50-P-1002-01A | Axial play between output shaft and rear cover | mm | - | - |
| BE27.50-P-1003-01A | Axial play between freewheel and connecting member | mm | - | - |
| BE27.50-P-1004-01A | End play between park pawl gear and grooved ball bearing | mm | 0, 20...0, 40 | 0, 20...0, 40 |
| BE27.50-P-1005-01A | Axial play between shim and retaining ring | mm | 0, 15...0, 60 | 0, 15...0, 60 |
| BE27.50-P-1006-01A | Axial play between input shaft and transmission housing | mm | - | - |
| BE27.50-P-1007-01A | Axial play between output shaft and transmission housing | mm | - | - |
| BE27.50-P-1008-01A | Axial play between countershaft and transmission housing | mm | - | - |
| BE27.50-P-1009-01A | Axial play between reverse gear shaft and transmission housing | mm | - | - |
| BE27.50-P-1010-01A | Preload of tapered roller bearings from differential | mm | - | - |