Tightening connecting rod bolts - AR03.10-P-6111-02VA
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 272, 273
CONNECTING ROD
| Number | Designation | Engine 272 | Engine 273 | ||
|---|---|---|---|---|---|
| BA03.10-P-1001-01E | Connecting rod bolt | Stage 1 | Nm | 5 | 5 |
| Stage 2 | Nm | 20 | 25 | ||
| Stage 3 | ∠° | 90 | 90 | ||
- Lubricate the bolt thread and head contact surface with engine oil.
- Tighten connecting rod bolts to step 1.
- Tighten connecting rod bolts to step 2.
- Tighten connecting rod bolts to step 3.
If no angle tightener is available, continue turning the connecting rod bolts to the specified angle using a socket wrench and locking handle.
Do not use a flexi-rod torque wrench for tightening in order to avoid any angle errors.
Shown on engine 272