Determine crankshaft bearing axial play - AR03.20-P-4291-03VA
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 272
MODIFICATION NOTES
| 18.2.08 | SWZ (136 589 04 21 00) removed and replaced by SWZ (363 589 02 21 00) |
TEST SPECIFICATIONS FOR CRANKSHAFT BEARING CLEARANCE
| Number | Designation | Engine 272 | ||
|---|---|---|---|---|
| BE03.20-P-1001-04E | Main bearing play | Radial measurement new | mm | 0.022...0.046 |
| Axial measurement when new | mm | 0.100 to 0.266 | ||
Only the one washer disc thickness is used.
- Install dial indicator (2) with dial indicator holder (1)
- Using a suitable tool, press the crankshaft axially on one side up to the attachment and hold it.
- Set scale of dial gage (2) to zero.
- Using a suitable tool, press the crankshaft axially on the other side up to the attachment and hold it.
- Read off measurement value at dial indicator (2).
The measured value corresponds to the axial play of the crankshaft.