Wet clutch control pressure, function - GF27.60-P-3027AHO
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION 724.2 in MODEL 212
Function requirements for wet clutch control pressure, general
- Circuit 87 (connected circuit 15) ON
- Oil pressure generation through the primary pump and/or electric transmission oil pump (M42) ON
Wet clutch control pressure, general
The regulating valve for the wet clutch has variable control pressure applied to it.
The wet clutch control pressure is adapted to the respective operating state through the wet clutch control solenoid valve (Y3/8y9) which is actuated by the fully integrated transmission control unit (Y3/8n4).
| Overview of system components for automatic transmission hybrid drive | GF27.10-P-9993AHO |