Transmission oil cooling, function - GF27.55-P-2000AHX

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

TRANSMISSION 722.930 up to 31.5.11, 722.931 as of 1.6.11 in MODEL 212.0/2

Function requirements for transmission oil cooling, general

Status "Circuit 87 ON"
Status "Circuit 61 ON"

Transmission oil cooling, general

To reach the operating temperature of the transmission quicker, the transmission oil is heated by the engine's cooling circuit.

Transmission oil cooling lowers the temperature of the transmission oil and thus prevents overheating damage in the transmission.

Function sequence for transmission oil cooling

The transmission oil is drawn out of the transmission oil pan by a mechanical pump in the transmission and is pumped via the feed to the transmission oil heat exchanger (which is integrated in the engine radiator). The transmission oil then flows from the transmission oil heat exchanger to the transmission oil thermostat. At a transmission oil temperature <90 °C, the transmission oil thermostat directs the transmission oil back to the transmission via the return.

At a transmission oil temperature >90 °C, the transmission oil thermostat opens and the transmission oil flows through the transmission oil cooler, before it flows back through the return to the transmission.

Overview of system components for automatic transmission (AT)

GF27.10-P-9992AHX