Inspection data of crankcase - BE01.40-P-1000-02K
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 651
CHECK VALUES OF CRANKCASE
| Number | Designation | Engine 651 | |||
|---|---|---|---|---|---|
| BE01.40-P-1001-02K | Crankshaft bearing | Basic bore diameter | mm | 64, 000...64, 019 | |
| Basic bore width at fitted bearing | mm | 21, 447...21, 480 | |||
| Permissible out-of-roundness and conicity of basic bore | mm | 0, 007 | |||
| BE01.40-P-1002-02K | Height of crankcase from middle of basic bearing New bore (H) | mm | 241 (± 0, 3) | ||
| BE01.40-P-1003-02K | Height of crankcase (H1) | mm | 306 (± 0, 18) | ||
| BE01.40-P-1004-02K | Height up to middle basic bearing bore (H2) | mm | 65 (± 0, 15) | ||