Inspection data of crankcase - BE01.40-P-1000-02F
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 628.960 /961/962/963, 629, 642
TEST AND ADJUSTMENT VALUES FOR CRANKCASE
| Number | Designation | Engine 628.960/961/962/963 | Engine 629 | |||
|---|---|---|---|---|---|---|
| BE01.40-P-1001-02F | Crankshaft bearing | Basic bore-Ø | mm | 74, 500...74, 519 | 80, 500...80, 519 | |
| Code number 52 | 1st stage blue | mm | 74, 500...74, 506 | 80, 500...80, 506 | ||
| Code number 54 | 2nd stage yellow | mm | 74, 506...74, 512 | 80, 506...80, 512 | ||
| Code number 56 | 3rd stage red | mm | 74, 512...74, 519 | 80, 512...80, 519 | ||
| Basic bore width at fit bearing | mm | 25, 29...25, 50 | - | |||
| Permissible out-of-roundness and conicity of basic bore | mm | 0, 02 | - | |||
| BE01.40-P-1002-02F | Cylinder crankcase | Peak-to-valley height (RZ) of top separating surface | mm | 0, 012 | - | |
| Waviness (Wt) of top contact surface | mm | 0, 009...0, 012 | - | |||
| Unevenness of contact surface in longitudinal direction | mm | 0, 03 | - | |||
| Unevenness of contact surface in transverse direction | mm | 0, 03 | - | |||
| Variation of parallelism of top contact surface to bottom in longitudinal direction | mm | - | - | |||
TEST AND ADJUSTMENT VALUES FOR CRANKCASE
| Number | Designation | Engine 642 | |||
|---|---|---|---|---|---|
| BE01.40-P-1001-02F | Crankshaft bearing | Basic bore-Ø | mm | 80, 500...80, 522 | |
| Code number 52 | 1st stage blue | mm | 80, 500...80, 507 | ||
| Code number 54 | 2nd stage yellow | mm | 80, 507...80, 514 | ||
| Code number 56 | 3rd stage red | mm | 80, 514...80, 522 | ||
| Basic bore width at fit bearing | mm | 24, 979...25, 000 | |||
| Permissible out-of-roundness and conicity of basic bore | mm | 0, 02 | |||
| BE01.40-P-1002-02F | Cylinder crankcase | Peak-to-valley height (RZ) of top separating surface | mm | 0, 015...0, 025 | |
| Waviness (Wt) of top contact surface | mm | 0, 001...0, 007 | |||
| Unevenness of contact surface in longitudinal direction | mm | 0, 03 | |||
| Unevenness of contact surface in transverse direction | mm | 0, 03 | |||
| Variation of parallelism of top contact surface to bottom in longitudinal direction | mm | - | |||