602 589 00 33 00 Impact extractor - WS01.00-P-0039B

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 152, 157, 271.8/9, 272, 276, 278, 470, 471, 473, 601, 602.91/93/94/96/983, 603.91/93/96/97, 604, 605, 606, 611/980, 612, 613, 615, 616, 617.93/95, 628, 629, 640, 642, 646, 647, 648, 651, 668

602 589 00 33 02 Threaded bolt

FG 01/Set B

WS01.00-P-0039-01B

Use in FG 01/03/07/18/Set B

Purpose:

Impact extractor for the prechamber and for oil spray nozzle.

For engine 611, 612, 613, 628, 629, 646, 647, 648 in combination with W 611 589 00 33 00 Extraction claw.

For engine 612.966, 640, 668 in combination with W 668 589 00 34 00 Clamping pliers. Use a knock-on balancing weight in combination with the W 604 589 00 34 00 extraction claw to knock out the oil spray nozzle in the crankcase.

For engine 651 in combination with use the W 651 589 00 33 00 extraction claw.

For engine 642 in combination with W 642 589 01 33 00 thread adapter. For engine 271 in combination with W 271 589 02 33 00 extractor.

Knock-on balancing weight in combination with W 611 589 01 33 00 extraction claw in order to knock out oil dipstick guide tube for engine 646 in model 636, 639.

With engine 470, 471, 473

Impact extractor to remove the crankshaft main bearing and components with an interference fit.

Fig 1: Identifying Impact Extractor (602 589 00 33 00)

Courtesy of MERCEDES-BENZ USA