000 588 11 62 00 Major assembly mount - WS01.00-P-0092B
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE ALL
Use in FG 01/25/27/28/33/35/41/46/47/49/55/Set B
Purpose:
Universal, transmission jack for lifting and for mounting and disassembly of major assemblies.
NOTE:
Support
In combination with suitable attachment (for example: transmission plate).
Reference information:
This criteria catalogue serves to provide support for selection of variants of workshop equipment available on the free market. It just describes the minimum requirement for fulfilling the Mercedes-Benz standard. There is therefore no cover to manufacturer specific equipment or devices.
For the order the standard dimension of 35 mm should be observed. This can if necessary also be achieved by means of an adapter.
Minimum requirements:
- Mercedes-Benz standard diameter for mounting hole: 35 mm
- Minimum load carrying capacity for transporter: 1.0 t
- Minimum load carrying capacity for commercial vehicle: 2.0 t