Prepare 1-component adhesive cartridge - AR67.10-P-1000-12SX

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL ALL

Fig 1: Identifying Adapter (000 589 86 63 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1089-02A	Glazing repair kit, 1-component adhesive, replaced by: A 221 670 81 01	A 221 670 21 01
BR00.45-Z-1135-02A	repair kit for installing windshields, 1-component adhesive	A 221 670 81 01
BR00.45-Z-1142-02A	Adhesive parts kit (with heptane cleaner)	A 451 989 01 71

Remove cartridge from repair kit and heat in cartridge preheater.
Heating time is approx. 60 minutes.
Screw on application nozzle onto cartridge.
Insert adapter and cartridge into cartridge gun.
The adhesive material can be pressed out using a commercially available electric (battery-powered) or pneumatic cartridge gun with push rod. To press the cartridge completely, insert adapter between cartridge piston and plate on push rod.