Line up rear wall window in the body opening - AR67.20-P-2000-04P

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 197.3, 203.0, 205.0/1/3, 207.3, 209.3, 211.0, 212.0/1, 218.3

MODEL 230.4 with CODE P99 (Special model "AMG Black Series")

REAR WINDOW CHECK VALUES

Number	Designation		Model 203.0
BE67.20-P-1001-01E	Distance between top edge seal and rear edge of Dimension "A" roof	mm	5

TEST VALUES FOR LIFTGATE WINDOW, REAR WINDOW

Number	Designation		Model 211.0
BE67.20-P-1001-01F	Distance between rear window molding at top and fixed glass element at rear	mm	5

TEST AND ADJUSTMENT VALUES FOR REAR WALL WINDOW

Number	Designation		Model 209
BE67.20-P-1001-01G	Distance between top edge of window and rear Dimension "A" edge of roof	mm	5

TEST AND ADJUSTMENT VALUES FOR REAR WALL WINDOW

Number	Designation		Model 207.3	Model 212
BE67.20-P-1001-01L	Distance between top edge of rear window and transition between rabbet and rear edge of roof	mm	5 (± 1)	4, 5 (± 1)

TEST AND ADJUSTMENT VALUES FOR REAR WALL WINDOW

Number	Designation		Model 218
BE67.20-P-1001-01L	Distance between top edge of rear window and transition between rabbet and rear edge of roof	mm	4, 5 (± 1)

REAR WINDOW

Number	Designation		Model 205
BE67.20-P-1001-01M	Distance between top edge of rear window and transition between rabbet and rear edge of roof	mm	2, 5 (± 1, 0)

REAR WINDOW

Number	Designation		Model 205
BE67.20-P-1002-01M	Distance between window edge at the side and the C-pillar panel	mm	3, 1 (± 1, 5)

Fig 1: Identifying Feeler Gauge (129 589 03 21 00)

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 203.0

Fig 2: Rear Wall Window In Body Opening - Shown On Model 203.0

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 211.0

Fig 3: Rear Wall Window In Body Opening - Shown On Model 211.0

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 212.0

Fig 4: Rear Wall Window In Body Opening - Shown On Model 212.0

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 209.3

Fig 5: Rear Wall Window In Body Opening - Shown On Model 209.3

Courtesy of MERCEDES-BENZ USA

Install cup suction tool on windshield (c).
Place rear window (c) on body flange (b) with aid of helper.
Align rear window (c) in body opening.
Model 203.0, 205.0/1/3, 207.3, 209.3, 211.0, 212.0/1, 218.3

Adjust distance dimension (A) with aid of feeler gauge.

Model 197.3

Model 230.4 with code P99 (Special model "AMG Black Series")

Do not adjust rear window (c) with feeler gauge; center parallel in body opening with aid of helper.

Shown on model 203.0

Fig 6: Gluing On Strips Of Tape (Arrows) At Top And Side

Courtesy of MERCEDES-BENZ USA

Glue on strips of tape (arrows) at top and side.
1. 5.1) Model 203.0, 205.0/1/3, 207.3, 209.3, 211.0, 212.0/1, 218.3 Model 230.4 with code P99 (Special model "AMG Black Series") Cut adhesive strips (arrows) at outer edges of rear window.
2. 5.2) Model 197.3 Cut adhesive strips (arrows) at transition between seal on rear window and body flange.
Remove rear window from vehicle.