Install windshield - AR67.10-P-1503-01P

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 117, 156, 169, 171, 172.4, 176, 203, 205, 207, 209, 211.0/2/6, 212, 213, 217, 218, 222, 230.4, 231, 238, 242, 245.2, 246, 253, 292, 414.700

Shown on model 169

Fig 1: Adhesive Tape Strips On Windshield

Courtesy of MERCEDES-BENZ USA

Open driver-side window.
The side window should remain open during the curing time. Otherwise the windshield (1) can be pressed toward outside by the air when a door is closed.
Position both cup suction tools on outside of windshield (1).
Together with a helper, center windshield (1) above windshield cutout in body flange and position congruent with tape strips (arrows).
Position windshield (1) on adhesive bead and press on until it rests on rubber window spacers and sealing lip.
Install windshield (1) within 10 min after applying adhesive material. Otherwise the adhesive force of the adhesive material starts to decrease.

Observe manufacturer's specifications for curing time of adhesive material.