Apply adhesive material - AR67.10-P-1000-08P

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 117, 129, 140, 156, 168, 169, 170, 171, 172.4, 176, 190, 197, 202, 203, 204, 205, 207, 208, 209, 210, 212, 213, 215, 217, 218, 230.4, 231, 238, 242, 245.2, 246, 253, 292, 414.700

MODEL 211 except CODE Z04 (Light armoring)

MODEL 220 except CODE Z04 (Light armoring) except CODE Z07 (Top protection)

MODEL 222 except CODE Z07 (Top protection)

Fig 1: Identifying Adapter (000 589 86 63 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1015-02A	Glazing repair kit, 2-component adhesive	A 220 670 00 93
BR00.45-Z-1089-02A	Glazing repair kit, 1-component adhesive, replaced by: A 221 670 81 01	A 221 670 21 01
BR00.45-Z-1135-02A	Repair kit for installing windshields, 1-component adhesive	A 221 670 81 01

The bonding area must be free of dust and grease. Otherwise the adhesive force of the adhesive material starts to decrease.

Model 117, 129, 140, 156, 168, 169, 170, 171, 172.4, 176, 190, 197, 202, 203, 204, 205, 207, 208, 209, 210, 212, 215, 217, 218, 230.4, 231, 242, 245.2, 246, 253, 292, 414.700

Model 211 except code Z04 (Light armoring)

Model 220 except code Z04 (Light armoring) except code Z07 (Top protection)

Model 222 except code Z07 (Top protection)

Model 213, 238

It is necessary to use the components of the corresponding repair kit.

Fig 2: Applying Adhesive Material

Courtesy of MERCEDES-BENZ USA

1. 1.1) Model 117, 129, 140, 156, 168, 169, 170, 171, 172.4, 176, 190, 197, 202, 203, 204, 205, 207, 208 (except 208.3), 209, 210, 212, 213, 215, 217, 218, 230.4, 231, 238, 242, 245.2, 246, 253, 292, 414.700 Model 211 except code Z04 (Light armoring) Model 220 except code Z04 (Light armoring) except code Z07 (Top protection) Model 222 except code Z07 (Top protection)
  Guide application nozzle 13 mm (2) along body flange (4) and uniformly apply adhesive material (1).
  
  Install window (3) within 10 min after applying adhesive (1). Otherwise the adhesive force of the adhesive material (1) starts to decrease.
  
  The height of the adhesive bead must be approx. 13 mm.
2. 1.2) Model 208.3 Guide application nozzle 16 mm (6) along profile seal (5) on inside of window (3) and uniformly apply adhesive material (1).
  Install window (3) within 10 min after applying adhesive (1). Otherwise the adhesive force of the adhesive material (1) starts to decrease.
  
  The height (b) of the adhesive bead must be approx. 16 mm.
Completely press out adhesive material (1) not required and dispose of.
Use adapter to completely press out 1- component adhesive. Insert between cartridge piston and plate on push rod of cartridge gun.