Align windshield in body opening - AR67.10-P-1000-04G

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 117, 156, 169, 170, 171, 172.4, 176, 205, 207, 209, 218, 230.4, 231, 242, 245.2, 246, 253

MODEL 212 except CODE Z04 (Light armoring)

Fig 1: Identifying Feeler Gauge (129 589 03 21 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Windshield Gap Dimension - Shown On Model 212, 218

Courtesy of MERCEDES-BENZ USA

Fig 3: Windshield Gap Dimension - Shown On Model 207, 209, 231

Courtesy of MERCEDES-BENZ USA

Fig 4: Windshield Gap Dimension - Shown On Model 117, 156, 169, 170, 171, 172, 176, 205, 230, 242, 245, 246, 253

Courtesy of MERCEDES-BENZ USA

Place windshield (1) down on windshield rubber spacers on body flange.
Center windshield (1) in body opening.
Adjust gap dimension (A) with feeler gauge.

Fig 5: Gluing On Strips Of Adhesive Tape

Courtesy of MERCEDES-BENZ USA

Glue on strips of adhesive tape (arrows).
Cut through adhesive strips (arrows) at top of windshield (1).
Remove windshield (1) from vehicle.