Retrofit AMG retainer button - AZ72.10-P-0005EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212

Picture 1

Fig 1: Front AMG Retainer Button (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Picture 2

Fig 2: Rear AMG Retainer Button (2 Of 2)

Courtesy of MERCEDES-BENZ USA

		Ensure that the door linings are not damaged, if necessary. cover door lining in working area.
	Remove
1	Remove standard front retainer buttons	For this purpose (see picture 1). The standard retainer buttons are provided with a thread and can be unscrewed from the linkages
2	Remove standard rear retaining buttons	For this purpose (see picture 2). The standard retainer buttons are arrested at the ends of the Bowden cables. They must be pulled off with a suitable tool, e.g. pliers.
	Install
3	Apply Loctite 243 to front AMG retainer buttons (1) from inside and screw onto linkage.	The front AMG retainer buttons (1) must be flush with the top edge of the door linings when locked. The labeling "AMG" must be legible from inside (see picture 1).
		Loctite 243	*BR00.45-Z-1133-02A
4	Apply adhesive to rear AMG retainer buttons (2) inside.	Carefully apply adhesive to rear AMG retainer buttons (2) at edge of first drilling stage (one to two drops). Adhesive should not reach between the rear AMG retainer buttons (2) and the guide sleeves (3), (see picture 2) or the Bowden cables.
		Ultra-fast super glue 20g. Sabesto	*BR00.45-Z-1095-02A
5	Install rear AMG retainer buttons (2) at ends of Bowden cables, align and press on.	Press rear AMG retainer buttons (2) to stop on ends of Bowden cables. Actuate inside door handle at same time to increase contact pressure. The adhesive is completely dry after 24 h. The rear AMG retainer buttons (2) must be flush with the top edge of the door linings when locked. The labeling "AMG" must be legible from inside (see picture 2).

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1133-02A	Loctite 243	A 613 989 09 71
BR00.45-Z-1095-02A	Ultra-fast super glue 20g. Sabesto	Adolf Wurth GmbH & Co. KG

PARTS ORDERING NOTES

Part no.	Designation	Quantity
A000 766 02 28	Front retainer button	2
A000 766 03 28	Rear retainer button	2