LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Detachable Body Components - 212 Chassis) >> Testing & Repair >> Remove/install mirror glass - AR88.70-P-9020CW

Remove/install mirror glass - AR88.70-P-9020CW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 203.7## #E with CODE 809 (Model year 2009) 

MODEL 166, 204, 207, 212, 218 

MODEL 164, 251 as of model year 2011 

Shown on model 204 with CODE (249) Automatically dimming inside and outside mirrors including folding outside mirrors 

Fig 1: Mirror Glass Remove/Install Components
G09977941Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
DANGER Risk of injury  caused by irritation of the skin, eyes and respiratory system through contact or inhalation of substances contained in the mirror lens. Wear protective gloves and safety glasses. AS60.00-Z-0008-01R
1 Tilt out mirror lens (1) upward    
2 Manually pull mirror glass (1) toward rear and unclip from left outside mirror (M21/1) or right outside mirror (M21/2) NOTES
When unclipping, ensure that mirror glass (1) and the catch hooks (2) are not damaged. Otherwise it is necessary to replace the mirror glass (1).
IMPORTANT Installation: Clip mirror glass (1) from bottom upward into left outside mirror (M21/1) or right outside mirror (M21/2). Ensure that all catch hooks (2) arrest completely.
 
3 Disconnect electrical connectors (3, 4) and remove mirror glass (1) NOTES
When installing ensure that electrical wiring harnesses are routed without pinching. Otherwise the electrical wiring harnesses can be damaged.
IMPORTANT The number of electrical connectors (3, 4) depends on the vehicle equipment.
 
4 Install in the reverse order