000 588 05 90 00 Clamping grommet - WS00.00-P-0036B

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL ALL

MODEL 100, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 123, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 242, 245, 246, 251, 253, 292

Use in FG 00/Sets B

Intended use:

Clamp grommet for suctioning off exhaust on vehicle.

Technical note:

Inner tube clamping

Procurement information:

This workshop equipment is not distributed through the regular replacement part ordering process in GLC/LC, but directly from the manufacturer/supplier.

Fig 1: Identifying Clamping Grommet (000 588 05 90 00)

Courtesy of MERCEDES-BENZ USA

Manufacturer 1

Nederman GmbH

Type/model: Inner tube clamping
Article no.: 20867661

Manufacturer 2

NORFI Absaugtechnik GmbH

Type/model: Inner tube clamping
Article no.: 25-4950-100