Remove/install vacuum reservoir - AR07.09-P-0001CD
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 651 in MODEL 166, 172, 204, 207, 212, 218, 221
Shown on model 212.098
| Remove/install | |||
| Risk of death when touching components on vehicles with high-voltage on-board electrical system | Do not touch components and open lines of the high-voltage on-board electrical system. Persons who wear electronic implants (e.g. cardiac pacemakers), must not carry out any work on high-voltage on-board electrical systems. | AS54.00-Z-0001-01A | |
| 1 | Remove cylinder head cover trim | ||
| 3 | Unhook coolant hose from holder | ||
| 4 | Unhook vacuum line in brake booster (5) on vacuum reservoir (6) (arrow) | ENGINE 651 in MODEL 212.098/298 | |
| 5 | Detach vacuum hose (1) | ||
| 6 | Mark vacuum hoses (3) | ||
| 7 | Mark vacuum hoses (3) and unclip at vacuum reservoir (6) and detach | ||
| 8 | Remove screw/bolts (2) and remove vacuum reservoir (6) | *BA14.20-P-1006-01K | |
| *BA14.20-P-1018-01K | |||
| 9 | Install in the reverse order |
EXHAUST GAS RECIRCULATION
| Number | Designation | ENGINE 651 | |
|---|---|---|---|
| BA14.20-P-1006-01K | Bolt, support brace for vacuum reservoir and exhaust heat exchanger to Y-support brace | Nm | 9 |
EXHAUST GAS RECIRCULATION
| Number | Designation | ENGINE 651 | |
|---|---|---|---|
| BA14.20-P-1018-01K | Bolt, vacuum reservoir to vacuum reservoir bracket or vacuum reservoir support brace and exhaust heat exchanger | Nm | 8 |