LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Mixture Formation - 212 Chassis - 05 Of 10) >> Testing & Repair >> Remove/install fuel pressure sensor >> Remove/install fuel pressure sensor - AR07.04-P-0030CMG

Remove/install fuel pressure sensor - AR07.04-P-0030CMG

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINES 156 in MODEL 204, 212 

Fig 1: Fuel Pressure Sensor Remove/Install Components
G09974630Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove air filter housing   AR09.10-P-1150CMG
2 Unlock and disconnect electrical connector (1) at pressure sensor (B4/15) INSTALLATION IMPORTANT Ensure that the electrical connector locks properly at the pressure sensor.  
3 Remove bolts (2) and pressure sensor (B4/15) INSTALLATION IMPORTANT Replace O-ring.  
    Lubricant paste *BR00.45-Z-1002-06A 
4 Install in the reverse order    
5 Read out fault memory using STAR DIAGNOSIS and erase if necessary    
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1002-06A Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00 A 000 989 01 60