Remove/install rear door control unit - AR72.29-P-1100CW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204.0/2/9, 212.0/2
Shown on model 204.0
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Buffer basic data for left rear door control unit (N69/3) and right rear door control unit (N69/4) in STAR DIAGNOSIS | ||
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 2 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | ||
| 3 | Remove rear door lining | AR72.12-P-1010CW | |
| 4 | Remove bolts (1) | ||
| 5 | Disconnect electrical connectors (2) from left rear door control unit (N69/3) and right rear door control unit (N69/4) | ||
| 6 | Install in the reverse order |