Remove, install inner door lining on rear door window frame - AR72.20-P-6616ES
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212.2
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on sensor system for trunk lid opening/closing | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Unclip center paneling (3) from rear-end door (6) with assembly wedge (2) | ||
| Figure | |||
| 2 | Unclip clip (7) with window frame paneling (1) from window frame in direction of arrow | Otherwise the mounting elements of the window frame paneling (1) can be damaged. |
|
| Figure | |||
| 3 | Unclip clip (8) with window frame paneling (1) from window frame in direction of arrow | Figure | |
| 4 | Unclip clip (9) with window frame paneling (1) from window frame in direction of arrow | Figure | |
| 5 | Unclip clip (10) with window frame paneling (1) from window frame in direction of arrow | Figure | |
| 6 | Unclip clips (11) with window frame paneling (1) from window frame and remove | Figure | |
| 7 | Install in the reverse order | Otherwise the mounting elements of the window frame paneling (1) can be damaged. |