Prepare triangular window for installation - AR72.12-P-1940-02EG
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212 with CODE (Z04) Light armoring
The gluing areas on the triangular window (1) must be absolutely free of dust and grease to prevent adhesion problems with the adhesive material when installing the window.
- Check triangular window (1) for scratches and damage, replace if necessary.
- Fold over protective foil on inside of triangular window (1) approx. 3 cm from screen pattern and fix in place on protective foil with adhesive tape.
Do not glue adhesive tape to protective coating on inside of triangular window (1), otherwise the protective coating can be damaged.
- Clean adhesive areas on triangular window (1).
- Coat adhesive areas on triangular window (1) with primer.