Connect cylinder leakage testing unit - AR01.00-P-1300-01SXI

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 642 in MODEL 204, 207, 212, 218, 221

MODIFICATION NOTES

17.7.14

Special tool 611 589 01 63 00 replaced by 642 589 02 63 00.

Fig 1: Identifying Screw-In Fitting (642 589 00 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Intermediate Piece (611 589 02 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Screw-In Fitting (642 589 02 63 00)

Courtesy of MERCEDES-BENZ USA

Screw screw-in piece M8 (1) or screw-in piece M10 (1) into the glow plug hole.
Screw-in piece (1) Use 642 589 00 63 00 for engine 642.8 or engine 642.9 with glow plug hole M8. Use screw-in piece (1) 642 589 02 63 00 for engine 642.8 with glow plug hole M10 without check valve.

Fig 4: Attaching Cylinder Leakage Tester On Adapter
Courtesy of MERCEDES-BENZ USA
Place adapter (2) on screw-in pieceM8 (1) or screw-in pieceM10 (1).
Attach cylinder leakage tester (3) to adapter (2).
Calibrate cylinder leakage tester (3).