Connect cylinder leakage testing unit - AR01.00-P-1300-01HB
ENGINE 607, 611.960/961/962/980, 612.961/962/963/965/966/967/990, 613.960/961, 628.960/961/962/963, 642.884/970/975, 646.8/951/961/962/963/966, 647.961, 648.960/961
ENGINE 651 in MODEL 117, 156, 166, 172, 176, 204, 207, 212, 218, 221, 246
Only use a suitably approved screw-in piece (1) for the respective engine. Furthermore the adapter must be used and for this one must ensure correct seating on the respective
screw-in piece (1).
Engine 611.960/961/962/980, 612.961/962/963/965/966/967/990, 613.960/961, 628.960/961/962/963, 646.8/951/961/962/963/966, 647.961, 648.960/961
For engines 611.960/961/962/980, 612.961/962/963/965/966/967/990, 613.960/961, 628.960/961/962/963, 646.8/951/961/962/963/966, 647.961, 648.960/961 use
screw-in piece (1) (611 589 01 63 00).
ENGINE 642.884/970/975, 651 For engines 642 and 651 use the
screw-in piece (1) (642 589 00 63 00).
Engine 607
For engine 607 use the
screw-in piece (1) (607 589 00 91 00).
- Remove check valve from the
screw-in piece (1)
Screw screw-in piece (1) into glow plug hole.
- Place adapter (2) on
screw-in piece (1).
- Attach cylinder leakage tester (3) on adapter (2).