LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Central Locking System - 212 Chassis) >> Testing & Repair >> Remove/install fuel filler flap CL element - AR80.20-P-2300EW

Remove/install fuel filler flap CL element - AR80.20-P-2300EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 204.9, 207.3, 212.0 

Shown on model 212.0 

Fig 1: Fuel Filler Flap CL Element Remove/Install Components - Shown On Model 212.0
G09977497Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove tank recess Model 204.9 AR88.60-P-2000CY
Model 207, 212.0 AR88.60-P-2000EW
2 Remove tank cap central locking motor (M14/10) with bracket (1) from rear fender (2) in direction of arrow INSTALLATION IMPORTANT Ensure that bracket (1) is seated correctly in lug (arrow A) of rear fender (2)  
3 Disconnect electrical connector (3)    
4 Unscrew bolt (4) from rear of bracket (1) and remove bracket (1) from tank cap central locking motor (M14/10) Only when replacing tank cap central locking motor (M14/10).  
5 Install in the reverse order