Open and close coupling - AR09.41-P-1311-01AL
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 133, 152, 156, 157, 176, 177, 178, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 607, 626, 629, 640, 642, 646, 651
Open clutch
- Slide nose (2) of catch spring (3) to position (B).
Never pull on the eyelet (1).
The catch spring (3) will lose its pretension otherwise.
- Detach hose on component.
- Replace sealing ring.
Close clutch
- Slide nose (2) of catch spring (3) to position (A).
- Slide hose onto component until the catch spring (3) latches.
- Check connection by pulling a little at the hose.