Electrical function schematic for thermal management - PE07.10-P-2712-97DAB
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 272, 273 in MODEL 212 except engine 272.98
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Vehicle speed, signal | 7G |
| 2 | Instrument cluster, message | 10F |
| 3 | Fan motor, specified rpm request | 5C |
| 4 | Air conditioning, status | 7E |
| 4 | Air conditioning, status | 10B |
| A1 | Instrument cluster | 12E |
| B11/4 | Coolant temperature sensor | 2L |
| B2/5 | Hot film mass air flow sensor | 7J |
| B2/5b1 | Intake air temperature sensor | 7J |
| B37 | Accelerator pedal sensor | 6D |
| B70 | Crankshaft Hall sensor | 6L |
| CAN B | Interior CAN | 11B |
| CAN E | Chassis CAN | 9D |
| CAN E | Chassis CAN | 9F |
| CAN E | Chassis CAN | 9G |
| M16/6 | Throttle valve actuator | 3K |
| M4/7 | Combustion engine and air conditioning with integrated control fan motor | 5C |
| N10/1 | Front SAM control unit with fuse and relay module | 9A |
| N22/7 | Automatic air conditioning control and operating unit | 14B |
| N3/10 | ME-SFI [ME] control unit | 5F |
| N30/4 | Electronic Stability Program control unit | 10H |
| N30/7 | Premium Electronic Stability Program control unit | 10H |
| U484 | Valid for gasoline engine 273 | 4L |
| U819 | Valid for gasoline engine 272 | 1E |
| U909 | Valid for DISTRONIC PLUS | 9H |
| U999 | Not valid with DISTRONIC PLUS | 9H |
| Y110 | Coolant thermostat | 2D |
| Y16/2 | Heating system shutoff valve | 1G |
| Y62/1 | Cylinder 1 injection valve | 4J |
| Y62/2 | Cylinder 2 injection valve | 4J |
| Y62/3 | Cylinder 3 injection valve | 4J |
| Y62/4 | Cylinder 4 injection valve | 4K |
| Y62/5 | Cylinder 5 injection valve | 4K |
| Y62/6 | Cylinder 6 injection valve | 4K |
| Y62/7 | Cylinder 7 injection valve | 4L |
| Y62/8 | Cylinder 8 injection valve | 4L |