Remove/install electric vacuum pump - AR43.05-P-0001EHV
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212.095/195 with ENGINE 276.9
| Remove/install | |||
| 1 | Switch off ignition | ||
| 2 | Push down brake pedal several times | ||
| 3 | Open engine hood and raise to vertical position | AR88.40-P-1000EW | |
| 4 | Remove front engine cover | ||
| 5 | Release and disconnect vacuum line (1) at the vacuum pump (M56) | ||
| 6 | Disconnect interior and engine wiring harness electrical connector (X26) from bracket (4) | ||
| 7 | Cut cable tie (3) | ||
| 8 | Release and disconnect electrical connector (2) | ||
| 9 | Remove screw/bolts (5) | ||
| 10 | Separate cable tie (8) | ||
| 11 | Unscrew bolt (7) | ||
| 12 | Remove screws/bolts (6) and take out vacuum pump (M56) together with the bracket (4) | ||
| 13 | Replace bracket for cable ties (3, 8) | When replacing vacuum pump (M56). | |
| 14 | Install in the reverse order | ||
| 15 | Reset running time of vacuum pump (M56) using Star Diagnosis | When replacing vacuum pump (M56). | |
| AD00.00-P-2000-04A |