Rear axle toe-in - BE40.20-P-1000-10Y
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212
TEST VALUES FOR REAR AXLE TOE
| Number | Designation | Model 212.0 with code 485, except 4MATIC | Model 212.0 with code 485, with 4MATIC | |||
|---|---|---|---|---|---|---|
| BE40.20-P-1001-10Y | Total toe at vehicle level | +3.07° | ∠° | - | - | |
| +2.58° | ∠° | - | - | |||
| +1.60° | ∠° | 0° 21' (± 7') | 0° 22' (± 7') | |||
| +0.72° | ∠° | - | - | |||
| +0.03° | ∠° | - | - | |||
| -0.06° | ∠° | - | - | |||
| -0.26° | ∠° | - | - | |||
| -0.79° | ∠° | - | - | |||
| -1.24° | ∠° | - | - | |||
| -1.29° | ∠° | - | - | |||
| BE40.20-P-1002-10Y | Permissible difference in rear axle toe between right and left side of vehicle | ∠° | ± 0° 15' | ± 0° 15' | ||
TEST VALUES FOR REAR AXLE TOE
| Number | Designation | Model 212.0 with code 486/677, except 4MATIC | Model 212.0 with code 486/677, with 4MATIC | |||
|---|---|---|---|---|---|---|
| BE40.20-P-1001-10Y | Total toe at vehicle level | +3.07° | ∠° | - | - | |
| +2.58° | ∠° | - | - | |||
| +1.60° | ∠° | - | - | |||
| +0.72° | ∠° | - | - | |||
| +0.03° | ∠° | - | - | |||
| -0.06° | ∠° | 0° 24' (± 7') | 0° 24' (± 7') | |||
| -0.26° | ∠° | - | - | |||
| -0.79° | ∠° | - | - | |||
| -1.24° | ∠° | - | - | |||
| -1.29° | ∠° | - | - | |||
| BE40.20-P-1002-10Y | Permissible difference in rear axle toe between right and left side of vehicle | ∠° | ± 0° 15' | ± 0° 15' | ||
TEST VALUES FOR REAR AXLE TOE
| Number | Designation | Model 212.002 with code P25 | Model 212.0/2 with code 482 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-10Y | Total toe at vehicle level | +3.07° | ∠° | - | 0° 18' (± 7') |
| +2.58° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +0.72° | ∠° | 0° 23' (± 7') | - | ||
| +0.03° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -1.24° | ∠° | - | - | ||
| -1.29° | ∠° | - | - | ||
| BE40.20-P-1002-10Y | Permissible difference in rear axle toe between right and left side of vehicle | - | ∠° | ± 0° 15' | ± 0° 15' |
TEST VALUES FOR REAR AXLE TOE
| Number | Designation | Model 212.0/2 with code 489, except 4MATIC | Model 212.0/2 with code 489, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-10Y | Total toe at vehicle level | +3.07° | ∠° | - | - |
| +2.58° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| -0.26° | ∠° | 0° 25' (± 7') | 0° 24' (± 7') | ||
| -0.79° | ∠° | - | - | ||
| -1.24° | ∠° | - | - | ||
| -1.29° | ∠° | - | - | ||
| BE40.20-P-1002-10Y | Permissible difference in rear axle toe between right and left side of vehicle | - | ∠° | ± 0° 15' | ± 0° 15' |
TEST VALUES FOR REAR AXLE TOE
| Number | Designation | Model 212.1 with code 482 | Model 212.1 with code 485 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-10Y | Total toe at vehicle level | +3.07° | ∠° | - | - |
| +2.58° | ∠° | 0° 19' (± 7') | - | ||
| +1.60° | ∠° | - | 0° 21' (± 7') | ||
| +0.72° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -1.24° | ∠° | - | - | ||
| -1.29° | ∠° | - | - | ||
| BE40.20-P-1002-10Y | Permissible difference in rear axle toe between right and left side of vehicle | - | ∠° | ± 0° 15' | ± 0° 15' |
TEST VALUES FOR REAR AXLE TOE
| Number | Designation | Model 212.2 with code 485, except 4MATIC | Model 212.2 with code 485, with 4MATIC | |||
|---|---|---|---|---|---|---|
| BE40.20-P-1001-10Y | Total toe at vehicle level | +3.07° | ∠° | - | - | |
| +2.58° | ∠° | - | - | |||
| +1.60° | ∠° | - | - | |||
| +0.72° | ∠° | - | - | |||
| +0.03° | ∠° | 0° 24' (± 7') | - | |||
| -0.06° | ∠° | - | - | |||
| -0.26° | ∠° | - | 0° 24' (± 7') | |||
| -0.79° | ∠° | - | - | |||
| -1.24° | ∠° | - | - | |||
| -1.29° | ∠° | - | - | |||
| BE40.20-P-1002-10Y | Permissible difference in rear axle toe between right and left side of vehicle | ∠° | ± 0° 15' | ± 0° 15' | ||
TEST VALUES FOR REAR AXLE TOE
| Number | Designation | Model 212.2 with code 486/677, except 4MATIC | Model 212.2 with code 486/677, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-10Y | Total toe at vehicle level | +3.07° | ∠° | - | - |
| +2.58° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -1.24° | ∠° | 0° 26' (± 7') | 0° 26' (± 7') | ||
| -1.29° | ∠° | - | - | ||
| BE40.20-P-1002-10Y | Permissible difference in rear axle toe between right and left side of vehicle | - | ∠° | ± 0° 15' | ± 0° 15' |
TEST VALUES FOR REAR AXLE TOE
| Number | Designation | Model 212.025/056/072 with CODE Z04 | Model 212 AMG up to 11.2011, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-10Y | Total toe at vehicle level | +3.07° | ∠° | - | - |
| +2.58° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| -0.26° | ∠° | 0° 25' (± 7') | - | ||
| -0.79° | ∠° | - | - | ||
| -1.24° | ∠° | - | 0° 14' (± 7') | ||
| -1.29° | ∠° | - | - | ||
| BE40.20-P-1002-10Y | Permissible difference in rear axle toe between right and left side of vehicle | - | ∠° | ± 0° 15' | ± 0° 3' |
TEST VALUES FOR REAR AXLE TOE
| Number | Designation | Model 212 AMG as of 12.2011, except 4MATIC | Model 212 AMG with 4MATIC | |||
|---|---|---|---|---|---|---|
| BE40.20-P-1001-10Y | Total toe at vehicle level | +3.07° | ∠° | - | - | |
| +2.58° | ∠° | - | - | |||
| +1.60° | ∠° | - | - | |||
| +0.72° | ∠° | - | - | |||
| +0.03° | ∠° | - | - | |||
| -0.06° | ∠° | - | - | |||
| -0.26° | ∠° | - | - | |||
| -0.79° | ∠° | 0° 14' (± 7') | - | |||
| -1.24° | ∠° | - | - | |||
| -1.29° | ∠° | - | 0° 14' (± 7') | |||
| BE40.20-P-1002-10Y | Permissible difference in rear axle toe between right and left side of vehicle | ∠° | ± 0° 3' | ± 0° 3' | ||