Rear axle camber - BE40.20-P-1000-09AD
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0 with code 485, except 4MATIC | Model 212.0 with code 485, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | -1° 2' (± 30') | -1° 2' (± 30') | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' | |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0 with code 486/677, except 4MATIC | Model 212.0 with code 486/677, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | -1° 27' (± 30') | -1° 27' (± 30') | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' | |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.002 with code P25 | Model 212.0/2 with code 482 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | |||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | -1° 15' (± 30') | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | 0° -42' (± 30') | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' | |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0/2 with code 489, except 4MATIC | Model 212.0/2 with code 489, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | -1° 30' (± 30') | -1° 30' (± 30') | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' | |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.1 with code 482 | Model 212.1 with code 485 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | -1° 2' (± 30') | ||
| +2.58° | ∠° | 0° -49' (± 30') | - | ||
| +3.07° | ∠° | - | - | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' | |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.2 with code 485, except 4MATIC | Model 212.2 with code 485, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | -1° 30' (± 30') | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | -1° 25' (± 30') | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' | |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.2 with code 486/677, except 4MATIC | Model 212.2 with code 486/677, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | -1° 45' (± 30') | -1° 45' (± 30') | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' | |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.025/056/072 with CODE Z04 | Model 212 AMG up to 11.2011, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | -2° 15' (± 24') | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | -1° 30' (± 30') | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 24' | |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212 AMG as of 12.2011, except 4MATIC | Model 212 AMG with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | -2° 22' (± 24') |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | -2° 15' (± 24') | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 24' | ± 0° 24' | |