Front axle camber - BE40.20-P-1000-13P
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER
| Number | Designation | MODEL 212.0 with CODE 485, except 4MATIC | MODEL 212.0 with CODE 677, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13P | Camber at vehicle level | +5.80° | ∠° | - | - |
| +4.85° | ∠° | - | - | ||
| +4.20° | ∠° | - | - | ||
| +4.16° | ∠° | - | - | ||
| +4.08° | ∠° | - | - | ||
| +2.67° | ∠° | - | - | ||
| +2.66° | ∠° | - | - | ||
| +2.60° | ∠° | - | - | ||
| +2.56° | ∠° | 0° -23' (±21') | - | ||
| +1.49° | ∠° | - | - | ||
| +1.18° | ∠° | - | - | ||
| +0.27° | ∠° | - | - | ||
| +0.25° | ∠° | - | - | ||
| +0.12° | ∠° | - | 0° -33' (±21') | ||
| BE40.20-P-1002-13P | Permissible difference in front axle camber between right and left side of vehicle | ∠° | ±0° 24' | ±0° 24' | |
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER
| Number | Designation | MODEL 212.0 with CODE 485, with 4MATIC | MODEL 212.0 with CODE 677, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13P | Camber at vehicle level | +5.80° | ∠° | - | - |
| +4.85° | ∠° | - | - | ||
| +4.20° | ∠° | - | - | ||
| +4.16° | ∠° | - | - | ||
| +4.08° | ∠° | - | - | ||
| +2.67° | ∠° | 0° -22' (±21') | - | ||
| +2.66° | ∠° | - | - | ||
| +2.60° | ∠° | - | - | ||
| +2.56° | ∠° | - | - | ||
| +1.49° | ∠° | - | - | ||
| +1.18° | ∠° | - | - | ||
| +0.27° | ∠° | - | - | ||
| +0.25° | ∠° | - | 0° -30' (±21') | ||
| +0.12° | ∠° | - | - | ||
| BE40.20-P-1002-13P | Permissible difference in front axle camber between right and left side of vehicle | ° | ±0° 24' | ±0° 24' | |
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER
| Number | Designation | MODEL 212.002 with CODEP25 | MODEL 212.0/2 with CODE 482 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13P | Camber at vehicle level | +5.80° | ∠° | - | - |
| +4.85° | ∠° | - | 0° -12' (±21') | ||
| +4.20° | ∠° | - | - | ||
| +4.16° | ∠° | - | - | ||
| +4.08° | ∠° | - | - | ||
| +2.67° | ∠° | - | - | ||
| +2.66° | ∠° | - | - | ||
| +2.60° | ∠° | - | - | ||
| +2.56° | ∠° | - | - | ||
| +1.49° | ∠° | 0° -27' (±21') | - | ||
| +1.18° | ∠° | - | - | ||
| +0.27° | ∠° | - | - | ||
| +0.25° | ∠° | - | - | ||
| +0.12° | ∠° | - | - | ||
| BE40.20-P-1002-13P | Permissible difference in front axle camber between right and left side of vehicle | ∠° | ±0° 24' | ±0° 24' | |
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER
| Number | Designation | MODEL 212.0/2 with CODE 489, except 4MATIC | MODEL 212.0/2 with CODE 489, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13P | Camber at vehicle level | +5.80° | ∠° | - | - |
| +4.85° | ∠° | - | - | ||
| +4.20° | ∠° | - | - | ||
| +4.16° | ∠° | - | - | ||
| +4.08° | ∠° | - | - | ||
| +2.67° | ∠° | - | - | ||
| +2.66° | ∠° | - | - | ||
| +2.60° | ∠° | - | - | ||
| +2.56° | ∠° | - | - | ||
| +1.49° | ∠° | - | - | ||
| +1.18° | ∠° | - | - | ||
| +0.27° | ∠° | 0° -33' (±21') | - | ||
| +0.25° | ∠° | - | 0° -30' (±21') | ||
| +0.12° | ∠° | - | - | ||
| BE40.20-P-1002-13P | Permissible difference in front axle camber between right and left side of vehicle | ∠° | ±0° 24' | ±0° 24' | |
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER
| Number | Designation | MODEL 212.1 with CODE 482 | MODEL 212.1 with CODE 485 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13P | Camber at vehicle level | +5.80° | ∠° | - | - |
| +4.85° | ∠° | - | - | ||
| +4.20° | ∠° | - | - | ||
| +4.16° | ∠° | - | - | ||
| +4.08° | ∠° | 0° -15' (±21') | - | ||
| +2.67° | ∠° | - | - | ||
| +2.66° | ∠° | - | - | ||
| +2.60° | ∠° | - | - | ||
| +2.56° | ∠° | - | 0° -23' (±21') | ||
| +1.49° | ∠° | - | - | ||
| +1.18° | ∠° | - | - | ||
| +0.27° | ∠° | - | - | ||
| +0.25° | ∠° | - | - | ||
| +0.12° | ∠° | - | - | ||
| BE40.20-P-1002-13P | Permissible difference in front axle camber between right and left side of vehicle | ∠° | ±0° 24' | ±0° 24' | |
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER
| Number | Designation | MODEL 212.2 with CODE 485, except 4MATIC | MODEL 212.2 with CODE 677, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13P | Camber at vehicle level | +5.80° | ∠° | - | - |
| +4.85° | ∠° | - | - | ||
| +4.20° | ∠° | - | - | ||
| +4.16° | ∠° | - | - | ||
| +4.08° | ∠° | - | - | ||
| +2.67° | ∠° | - | - | ||
| +2.66° | ∠° | - | - | ||
| +2.60° | ∠° | - | - | ||
| +2.56° | ∠° | 0° -23' (±21') | - | ||
| +1.49° | ∠° | - | - | ||
| +1.18° | ∠° | - | - | ||
| +0.27° | ∠° | - | - | ||
| +0.25° | ∠° | - | - | ||
| +0.12° | ∠° | - | 0° -33' (±21') | ||
| BE40.20-P-1002-13P | Permissible difference in front axle camber between right and left side of vehicle | ∠° | ±0° 24' | ±0° 24' | |
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER
| Number | Designation | MODEL 212.2 with CODE 485, with 4MATIC | MODEL 212.2 with CODE 677, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13P | Camber at vehicle level | +5.80° | ∠° | - | - |
| +4.85° | ∠° | - | - | ||
| +4.20° | ∠° | - | - | ||
| +4.16° | ∠° | - | - | ||
| +4.08° | ∠° | - | - | ||
| +2.67° | ∠° | - | - | ||
| +2.66° | ∠° | 0° -33' (±21') | - | ||
| +2.60° | ∠° | - | - | ||
| +2.56° | ∠° | - | - | ||
| +1.49° | ∠° | - | - | ||
| +1.18° | ∠° | - | - | ||
| +0.27° | ∠° | - | - | ||
| +0.25° | ∠° | - | 0° -30' (±21') | ||
| +0.12° | ∠° | - | - | ||
| BE40.20-P-1002-13P | Permissible difference in front axle camber between right and left side of vehicle | ∠° | ±0° 24' | ±0° 24' | |
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER
| Number | Designation | MODEL 212.025/056/072 with CODE Z04 | MODEL 212 AMG up to 11.2011, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13P | Camber at vehicle level | +5.80° | ∠° | - | - |
| +4.85° | ∠° | - | - | ||
| +4.20° | ∠° | - | - | ||
| +4.16° | ∠° | - | - | ||
| +4.08° | ∠° | - | - | ||
| +2.67° | ∠° | - | -1, 32' (±21') | ||
| +2.66° | ∠° | - | - | ||
| +2.60° | ∠° | - | - | ||
| +2.56° | ∠° | - | - | ||
| +1.49° | ∠° | - | - | ||
| +1.18° | ∠° | - | - | ||
| +0.27° | ∠° | 0° -33' (±21') | - | ||
| +0.25° | ∠° | - | - | ||
| +0.12° | ∠° | - | - | ||
| BE40.20-P-1002-13P | Permissible difference in front axle camber between right and left side of vehicle | ∠° | ±0° 24' | ±0° 24' | |
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER
| Number | Designation | MODEL 212 AMG as of 12.2011, except 4MATIC | MODEL 212 AMG with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-13P | Camber at vehicle level | +5.80° | ∠° | - | - |
| +4.85° | ∠° | - | - | ||
| +4.20° | ∠° | - | -1, 47' (±21') | ||
| +4.16° | ∠° | - | - | ||
| +4.08° | ∠° | - | - | ||
| +2.67° | ∠° | -1, 32' (±21') | - | ||
| +2.66° | ∠° | - | - | ||
| +2.60° | ∠° | - | - | ||
| +2.56° | ∠° | - | - | ||
| +1.49° | ∠° | - | - | ||
| +1.18° | ∠° | - | - | ||
| +0.27° | ∠° | - | - | ||
| +0.25° | ∠° | - | - | ||
| +0.12° | ∠° | - | - | ||
| BE40.20-P-1002-13P | Permissible difference in front axle camber between right and left side of vehicle | ∠° | ±0° 24' | ±0° 24' | |