LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Wheels, Chassis Alignment Check - 212 Chassis - 3 Of 3) >> Special Tools >> 000 588 13 21 00 Suspension measuring unit - WS40.00-P-0013B

000 588 13 21 00 Suspension measuring unit - WS40.00-P-0013B

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL ALL 

Use in FG 40/Set B 

Intended use: 

Car suspension measuring unit for measuring suspension geometry.

Test equipment category CAT_B.

Procurement information: 

The sale and distribution of this workshop equipment does not take place via the regular replacement part ordering process at the GLC/LC but directly via the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found below .

Fig 1: Identifying Suspension Measuring Unit (000 588 13 21 00)
G09976477Courtesy of MERCEDES-BENZ USA
NOTE: The suspension measuring units listed here operate according to the following measuring method

The suspension geometry on heavy-duty vans from Mercedes-Benz can also be measured using the suspension measuring units listed below.

Manufacturer 1 

Automotive Testing Technologies GmbH

Manufacturer 2 

Beissbarth GmbH

Manufacturer 3 

Corghi S.p.A.

Manufacturer 4 

Hunter Deutschland GmbH

Manufacturer 5 

Otto Nusbaum GmbH & Co. KG

Manufacturer 6 

Snap-on Equipment srl