Measure and adjust clearance in multidisk brake BR - AR27.51-P-7229-01W
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION 722.9, 724.2
ADJUSTMENT VALUES OF MULTI-DISK BRAKE
| Number | Designation | TRANSMISSION 722.9 (except 722.93) | TRANSMISSION 722.93 | |
|---|---|---|---|---|
| BE27.50-P-1004-02C | Clearance of multi-disk brake BR | mm | 1, 00...1, 40 | 1, 00...1, 40 |
SET VALUES FOR MULTI-DISK BRAKE
| Number | Designation | TRANSMISSION 724.2 | |
|---|---|---|---|
| BE27.50-P-1004-02D | Clearance of multi-disk brake BR | mm | 1, 00...1, 40 |
Before the clearance measurement the disks must be immersed in automatic transmission fluid for at least one hour so that the friction lining can swell up.
- Using a feeler gauge determine the clearance at three points between the circlip (133a) and externally toothed plate (133c).
For the measuring process the retaining ring (133a) must abut the upper contact surface of the groove in the external plate carrier.
- Remove retaining ring (133a) and determine its thickness.
- Adjust clearance; to do this, install circlip (133a) of appropriate thickness.