111 589 25 61 00 Valve assembly tools kit - WS05.00-P-3137BA

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 104, 111, 112, 113, 119, 120, 122, 132, 133, 134, 135, 152, 155, 156, 157, 159, 160, 166, 200, 266, 270, 271, 272, 273, 274, 276, 278, 281, 601, 602, 603, 604, 605, 606, 607, 611/980, 612/965/966, 613, 622, 626, 628, 629, 639, 640, 642, 646, 647, 648, 651, 660, 668

111 589 25 61 03 Lever handle	FG05/Set C	WS05.00-P-3137-03C
111 589 25 61 05 Detent depressor	FG05/Set C	WS05.00-P-3137-05C
111 589 25 61 06 Thrust fork	FG05/Set C	WS05.00-P-3137-06C
111 589 25 61 12 Fixing bracket	FG05/Set C	WS05.00-P-3137-12C
111 589 25 61 19 Grid	FG05/Set C	WS05.00-P-3137-19C

Use in FG 05/Set B

Purpose:

Assembly tool for valve springs in a plastic case.

NOTE: For engines with tappet holes in the cylinder head, assembly of the valve locks is performed automatically by the assembly cartridges.

Fig 1: Identifying Valve Assembly Tools Kit (111 589 25 61 00)

Courtesy of MERCEDES-BENZ USA

Consisting of:

Part 1 case empty

Part 2 Impact bolt

Part 3 Lever handle

Part 4 Extension

Part 5 Detent depresser for thrust piece

Part 6 Thrust fork for assembly cartridges

Part 7 Thrust piece for detent depressor

Part 8 Assembly cartridge length 83 mm (gasoline engine)

Part 9 Assembly cartridge length 102 mm (diesel engine)

Part 10 Pilot bushing length 28.6 mm (gasoline engine)

Part 11 Pilot bushing length 53 mm (diesel engine)

Part 12 Retaining fork M 6x15 mm

Part 13 Retaining fork M 7x25 mm

Teil 14 Retaining fork M 7x30 (bolt length 60 mm)

Part 15 Retaining fork M 8x20 mm

Teil 16 Threaded hook M6x23 mm

Teil 17 Threaded hook M7x23 mm

Teil 18 Threaded hook M8x20 mm

Part 19 Grid with joint bearing