Remove/install folded rubber seal of front panoramic glass roof - AR77.21-P-0530EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 166, 204.3, 207.3, 212.0/1/2 with CODE (413) Panoramic glass roof with top sliding roof
Shown on left side of vehicle on model 212.0
| Remove/install | |||
| Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | AS00.00-Z-0011-01A | |
| 1 | Open roller sun blind, move front glass roof (1) into tilt position | ||
| 2 | Detach bottom rubber (2) in front area (arrow A) from the mount (4) on the panoramic roof rail and remove in the direction of the arrow (arrow B) | ||
| 3 | Upper rubber (3) on front glass roof (1) unclip and remove | ||
| 4 | Install in the reverse order |