Prepare rear panoramic roof cover for installation - AR77.21-P-0751-01EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 204.3, 207.3, 212.0 with CODE (413) Panoramic glass roof with top sliding roof

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1089-02A	Repair kit, installing window, 1-component adhesive, replaced by: A 221 670 81 01	A 221 670 21 01

Fig 1: Panoramic Roof Cover

Courtesy of MERCEDES-BENZ USA

Wear cotton gloves. Fingerprints should not occur anywhere on the inside of the panoramic roof cover (1). To prevent adhesion disturbances when installing windows, ensure that the entire inside of the panoramic roof cover (1) are free of dust, oil, grease, wax, contamination residues and other adhesive substances.

Check panoramic roof cover (1) for damage.
Apply cleaner with part of paper towel to entire inside of panoramic roof cover (1) and wipe with remaining paper towel.
Allow cleaner to dry completely.
Uniformly apply primer over full surface in crosshatched area on panoramic roof cover (1).
Observe drying time of at least 10 minutes. Apply primer to inside of panoramic roof cover (1). Use same bonding area as on removed panoramic roof cover (1)