Prepare panoramic roof frame for installation - AR77.21-P-0800-02SX
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 166, 204.3, 207.3, 212, 221.1 with CODE 413 (Automatic panoramic sliding sunroof)
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1089-02A | Glazing repair kit, 1-component adhesive, replaced by: A 221 670 81 01 | A 221 670 21 01 |
| BR00.45-Z-1135-02A | Repair kit for installing windshields, 1-component adhesive | A 221 670 81 01 |
The bonding area must be free of dust and grease. Otherwise the adhesive force of the adhesive material starts to decrease.
- Check panoramic roof frame (1) with all detachable body components for damage.
- Install cup suction tool on outer side of panoramic roof frame (1) and lay panoramic roof frame (1) down to suitable subsurface with inside pointing upward.
- Apply cleaner with part of paper towel to bonding surfaces (2, 3) on panoramic roof frame (1) and wipe with remaining paper towel.
Apply clean to bonding surfaces (2, 3) only. Allow cleaner to dry completely. Use cleaner and paper towel from repair kit for installing window.