Apply glue for panoramic roof frame - AR77.21-P-0800-03SX
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 166, 204.3, 207.3, 212, 221.1 with CODE 413 (Automatic panoramic sliding sunroof)
MODEL 217.3
MODIFICATION NOTES
| 13.10.2016 |
Tool for applying adhesive material added |
|
|
REPAIR MATERIALS
| Number |
Designation |
Order number |
| BR00.45-Z-1031-02A |
Glazing repair kit 500662 01/03/05/07/09/11 |
A 973 670 00 93 |
Do not touch bonding surfaces with bare fingers and they should be free of dust, oil, grease, wax and other adhesive components or dirt residues. Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured.
Only use materials from repair kit approved and always observe processing notes included. Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured.
Shown on model 221
Courtesy of MERCEDES-BENZ USA
- Cut out triangular opening on application nozzle so that adhesive can be applied with a height of approx. 14 mm and a width of approx. 8 mm.
- Uniformly apply adhesive to bonding surfaces (1, 2).
Immediately remove contamination caused by the adhesive. Completely remove excess adhesive from cartridges immediately after applying adhesive and dispose of it as per local regulations.