Apply adhesive material for rear glass roof - AR77.21-P-0600-03SX
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 166, 207.3, 212, 221.1 with CODE (413) Panoramic glass roof with top sliding roof
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1089-02A | Repair kit, installing window, 1-component adhesive, replaced by: A 221 670 81 01 | A 221 670 21 01 |
Shown on model 221
Wear cotton gloves. Ensure that no fingerprints (1, 2) are present in the area of the bonding surface. To prevent adhesion problems when installing, keep bonding surfaces (1, 2) free of dust, oil, grease, wax, dirt residues and other anti-adhesive components.
- Cut triangular opening of application nozzle so that adhesive can be applied with a height of approx. 14 mm and a width of approx. 8 mm.
- Guide application nozzle on bonding surfaces (1, 2) along flange while uniformly pressing out glue. Electric cartridge gun + preheater
.
Carefully remove glue residues. Completely remove excess adhesive from cartridges immediately after applying adhesive and dispose of it as per local regulations.