Retrofit COMAND remote control - AN82.85-P-0010EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212.1## 1# with CODE 512 (COMAND APS with DVD changer) except CODE 864 (Rear compartment entertainment package)
MODEL 212.1## 1# with CODE 527 (COMAND APS with single DVD drive (with navigation)) except CODE 864 (Rear compartment entertainment package)
| Install | |||
| 1 | Remove battery compartment cover from COMAND remote control, insert batteries included in the package contents into COMAND remote control and close battery compartment cover again | ||
| 2 | Place COMAND remote control at suitable position in vehicle | ||
| Update Vehicle Documentation (VeDoc) | |||
| 3 | Enter special equipment in on-line vehicle data card | ||
| 4 | Attach note "Remote control retrofitted as per AN82.85-P-0010EW " under field organization texts to design group 82 | ||
| 5 | Connect diagnostic system and select vehicle via the vehicle identification number (VIN) | ||
| AD00.00-P-2000-04A | |||
| 6 | Carry out variant coding using software calibration number (SCN) | ||
| 7 | Disconnect diagnostic system | ||
| AD00.00-P-2000-04A | |||
| Check | |||
| 8 | Perform function test |
PARTS ORDERING NOTE
| Part no. | Designation | Quantity |
|---|---|---|
| KG 99 (siehe EPC) | Scope of delivery for COMAND remote control | 1 |