Install additional fan for COMAND - AN82.85-P-0005-01EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212.0##/2## 1# up to 4/12/13

Fig 1: COMAND Fan Motor, Air Intake And Exhaust Duct

Courtesy of MERCEDES-BENZ USA

Press steering column tube (5) to one side and position COMAND fan motor (M413) at the supports at the air conditioner housing (6).

Tighten bolts (7).

Clip in bracket (10) of COMAND fan motor wiring harness (11) at air conditioner housing (6) (arrow).

Fig 2: COMAND Fan Motor Air Conditioner Housing And Steering Column Tube

Courtesy of MERCEDES-BENZ USA

Press steering column tube (5) to one side and insert air exhaust duct (3) through the opening in the instrument panel into the slot of the COMAND controller unit.

In the process, the catch hook (8) at the air exhaust duct (3) must be clipped into the slot of the COMAND controller unit.

Counterhold air exhaust duct (3) through the opening in the instrument panel and mount air exhaust duct (4) onto air exhaust duct (3).

Fig 3: Steering Column Tube And Air Exhaust Duct

Courtesy of MERCEDES-BENZ USA

Mount air exhaust duct (2) through the opening in the instrument panel onto the air exhaust duct (3).

Mount air exhaust duct (2) onto COMAND fan motor (M4/13).

Fig 4: COMAND Fan Motor And Air Exhaust Duct

Courtesy of MERCEDES-BENZ USA

Set air exhaust duct (1) on COMAND fan motor and lock it.

Tighten air exhaust duct (1) and air exhaust duct (2) with screw/bolt (9).

Fig 5: COMAND Fan Motor, Air Exhaust Duct And Screw/Bolt

Courtesy of MERCEDES-BENZ USA