LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Electrical System, Equipment & Instruments - 212 Chassis - 2 Of 6) >> Testing & Repair >> Initial filling of battery - AR54.10-P-0001Z

Initial filling of battery - AR54.10-P-0001Z

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODELS ALL 

Maximum fluid level 

Fig 1: Filling Battery
G09976882Courtesy of MERCEDES-BENZ USA
  Filling     
DANGER Risk of explosion  caused by escaping oxyhydrogen gas. Risk of injury  caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries  caused by short circuit. Risk of poisoning  caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices No fire, sparks, open flames or smoking.
Wear acid-resistant gloves and clothing and safety glasses with side guards.
Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.
Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.
AS54.10-Z-0001-01A
1 Pour in battery electrolyte up to inner level marking with a filling device Let the battery stand for approximately 20 minutes and afterwards control the fluid level if necessary.  
    COMMERCIALLY AVAILABLE TOOLS *WE58.40-Z-1001-22A 
NOTES Notes on battery All models AH54.10-P-0001-01A
WORKSHOP EQUIPMENT

WE58.40-Z-1001-22A Tank emptying device