Remove/install oil separator - AR01.20-P-9750EWS
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINES 272, 273 in MODEL 212
| Remove/install | |||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| 1 | Remove air filter housing | AR09.10-P-1150EWS | |
| 2 | Unclip line (1) from bracket at oil separator (2) | ||
| 3 | Remove bolts (2a) of oil separator (2) | *BA01.20-P-1003-01L | |
| 4 | Remove the oil separator (2) from the cylinder head cover (3) and detach it from the hose (4) | ||
| 5 | Install in the reverse order | ||
| Checking | |||
| Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A | |
| 6 | Conduct engine test run and check engine for leaks | ||
| 7 | Check engine oil level; correct if necessary |
CRANKCASE VENTILATION, CYLINDER HEAD COVER
| Number | Designation | Engine 272 | Engine 273 | |
|---|---|---|---|---|
| BA01.20-P-1003-01L | Bolt connecting oil separator to cylinder head cover | Nm | 12 | 12 |