Scrapping shock absorber impact dampers - OS88.20-P-1000-01A
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2019 Mercedes-Benz B250, 2018 Mercedes-Benz B250, 2017 Mercedes-Benz B250, 2016 Mercedes-Benz B250, and 2015 Mercedes-Benz SLK55 AMG. However, it is still accessible from the selected car via links, so may be relevant.
MODEL ALL
with CODE (491) U.S. version
with CODE (494) California version
- To relieve the gas pressure drill a 5 mm hole on the flange side of the impact damper approx. 5 mm to the side of the filler rivet (arrow).
- Push rubber boot and clamping ring down towards the flange and cut open rubber boot.
- If necessary drill a second 5 mm hole in the impact damper tube approx. 30 mm below the flange (arrow) and force out the oil by compressing and extending the impact damper several times.