LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Exhaust Manifold, Engine Brake, Emission Control System - Maintenance >> Maintenance >> Fill AdBlue (R) tank - AP14.40-P-1410BT

Fill AdBlue (R) tank - AP14.40-P-1410BT

ENGINE 626, 651 in MODEL 205 with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) 

ENGINE 626, 651 in MODEL 205 with CODE U77 (Diesel Emission control BLUETEC (SCR)) 

ENGINE 642 in MODEL 164, 166, 212, 218, 221, 251 with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) 

ENGINE 642 in MODEL 222 

ENGINE 642, 651 in MODEL 207 with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) with CODE U77 (Diesel Emission control BLUETEC (SCR)) 

ENGINE 642.886 in MODEL 463.306/336/346 

ENGINE 651 in MODEL 166, 204.9, 212 with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) 

ENGINE 651 in MODEL 222 

External filling, shown on model 166.0 

Fig 1: Filling Vehicle AdBlue(R) Reservoir (External Filling)
G10037818Courtesy of MERCEDES-BENZ USA
Fig 2: Filling Vehicle AdBlue(R) Reservoir (Internal Filling)
G10037819Courtesy of MERCEDES-BENZ USA

Internal filling, shown on model 221 

DANGER Risk of burn injuries and scalding  when working at AdBlue lines and the components attached to them. Risk of injury  to skin and eyes when handling AdBlue. Risk of poisoning  caused by swallowing AdBlue Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust after treatment system. AS14.40-Z-0001-01A
NOTES Notes on use, material properties and handling of AdBlue®   AH14.40-N-0001-01AB
REMOVING Remove     
1.1 Open liftgate or trunk lid and clear access to filler opening of the AdBlue® tank Vehicles with internal filling MODEL 164, 204.9, 212, 218, 221, 251  
1.2 Open filler door and remove cap from AdBlue® filler neck Vehicles with external filling, MODEL 166, 205, 222, 463  
  Filling     
2 Fill AdBlue® container with new AdBlue®    
REFER TO TESTING & REPAIR   MODEL 164, 212, 218, 221, 251 AR14.40-P-2014-02GZB
REFER TO TESTING & REPAIR   MODEL 166 AR14.40-P-2014-02GQ
REFER TO TESTING & REPAIR   MODEL 204.9 AR14.40-P-2014-03A
REFER TO TESTING & REPAIR   MODEL 205 AR14.40-P-2014-02LWB
REFER TO TESTING & REPAIR   MODEL 207 AR14.40-P-2014-02ECM
REFER TO TESTING & REPAIR   MODEL 222 AR14.40-P-2014-02LF
REFER TO TESTING & REPAIR   MODEL 463.306/336/346 AR14.40-P-2014-02G
    NOTES The filling tools are designed in such a way as to leave an unfilled space in the AdBlue® container after switching off.
Never pour in more AdBlue® after switching off otherwise there a risk of damaging the AdBlue® tank!
IMPORTANT For USA and Canada only
Filling using BLUETEC AdBlue® filling pumps.
 
    FLUID SPECIFICATION *BF14.40-P-1001-01A 
    ENGINE 642 in MODEL 164.1
with CODE U42 (BlueTEC diesel exhaust treatment (SCR))
ENGINE 642 in MODEL 164.8
with CODE U42 (BlueTEC diesel exhaust treatment (SCR))
ENGINE 642 in MODEL 166.8
with CODE U42 (BlueTEC diesel exhaust treatment (SCR))
ENGINE 642 in MODEL 212
with CODE U42 (BlueTEC diesel exhaust treatment (SCR))
ENGINE 642 in MODEL 218
with CODE U42 (BlueTEC diesel exhaust treatment (SCR))
ENGINE 642 in MODEL 221
with CODE U42 (BlueTEC diesel exhaust treatment (SCR))
ENGINE 642 in MODEL 222
ENGINE 642 in MODEL 251
with CODE U42 (BlueTEC diesel exhaust treatment (SCR))
ENGINE 642, 651 in MODEL 166.0
with CODE U42 (BlueTEC diesel exhaust treatment (SCR))
ENGINE 642, 651 in MODEL 207
with CODE U42 (BlueTEC diesel exhaust treatment (SCR))
with CODE U77 (Diesel Emission control
BLUETEC (SCR))
ENGINE 642.886 in MODEL 463.306/336/346
 
    FLUID SPECIFICATION MODEL 205 *BF14.40-P-1001-01B 
    BLUTEC AdBlue filling pumps/devices  
INSTALLING Install     
3.1 Seal cap on AdBlue® filler neck and close fuel filler door Vehicles with external filling, MODEL 166, 205, 222, 463  
3.2 Seal filler opening of AdBlue® container and close liftgate or trunk lid Vehicles with internal filling MODEL 164, 204.9, 212, 218, 221, 251  
FILLING CAPACITY FOR BLUETEC DIESEL EXHAUST TREATMENT (SCR)

Number Designation MODEL 164.1 with ENGINE 642 with CODE U42 MODEL 164.8 with ENGINE 642 with CODE U42
BF14.40-P-1001-01A AdBlue® tank Initial fill capacity Liter 28, 1 33, 3
Service fill capacity Liter 26, 6 31, 7
Specification   Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1 Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1
FILLING CAPACITY FOR BLUETEC DIESEL EXHAUST TREATMENT (SCR)

Number Designation MODEL 166.0 with ENGINE 642, 651 with CODE U42 MODEL 166.8 with ENGINE 642 with CODE U42
BF14.40-P-1001-01A AdBlue® tank Initial fill capacity Liter 27, 8 32, 3
Service fill capacity Liter 27, 0 30, 7
Specification   Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1 Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1
FILLING CAPACITY FOR BLUETEC DIESEL EXHAUST TREATMENT (SCR)

Number Designation MODEL 207.3 with ENGINE 642, 651 with CODE U77 MODEL 207.4 with ENGINE 642, 651 with CODE U77
BF14.40-P-1001-01A AdBlue® tank Initial fill capacity Liter 29, 2 26, 0
Service fill capacity Liter 28, 2 25, 5
Specification   Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1 Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1
FILLING CAPACITY FOR BLUETEC DIESEL EXHAUST TREATMENT (SCR)

Number Designation MODEL 212 with ENGINE 642 with CODE U42 MODEL 218 with ENGINE 642 with CODE U42
BF14.40-P-1001-01A AdBlue® tank Initial fill capacity Liter 25, 5 25, 5
Service fill capacity Liter 24, 5 24, 5
Specification   Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1 Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1
FILLING CAPACITY FOR BLUETEC DIESEL EXHAUST TREATMENT (SCR)

Number Designation MODEL 221 with ENGINE 642 with CODE U42 MODEL 222 with ENGINE 642
BF14.40-P-1001-01A AdBlue® tank Initial fill capacity Liter 26, 0 26, 0
Service fill capacity Liter 25, 0 25, 5
Specification   Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1 Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1
FILLING CAPACITY FOR BLUETEC DIESEL EXHAUST TREATMENT (SCR)

Number Designation MODEL 251 with ENGINE 642 with CODE U42 MODEL 463 with ENGINE 642
BF14.40-P-1001-01A AdBlue® tank Initial fill capacity Liter 29, 0 16, 0
Service fill capacity Liter 28, 2 15, 0
Specification   Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1 Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1
FILLING CAPACITY FOR BLUETEC DIESEL EXHAUST TREATMENT (SCR)

Number Designation Model 205 except code U85 Model 205 with code U85
BF14.40-P-1001-01B AdBlue tank Filling capacity for the initial filling Liter 9, 0 25, 0
Filling capacity for a service filling Liter 8, 5 24, 5
Specification   Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1 Approved NOx reducing agent ("AD Blue"). See https://bevo.mercedes-benz.com/index.php?language_id=1