Camshaft, camshaft adjustment - BA05.20-P-1000-02A
ENGINE 103, 104, 111, 152, 157, 271, 272, 273, 276, 278
MODIFICATION NOTES
| 18.6.13 | Value changed: Center valve, pulse wheel/camshaft adjuster to camshaft | ENGINE 152 | |
| 18.6.13 | Value changed: Center valve, pulse wheel/camshaft adjuster to camshaft | ENGINE 157 |
CAMSHAFT, CAMSHAFT ADJUSTMENT
| Number | Designation | ENGINE 103 | ENGINE 104 | ||
|---|---|---|---|---|---|
| BA05.20-P-1001-02A | Screw/bolt, camshaft sprocket/stub shaft | Stage 1 | Nm | - | 20 |
| Stage 2 | ∠° | - | 90 | ||
| BA05.20-P-1002-02A | Center bolt, camshaft adjuster to camshaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1003-02A | Nut, camshaft sprocket to stub shaft | Nm | - | 65 | |
| BA05.20-P-1004-02A | Screw/bolt, camshaft bearing cap | Nm | 21 | 21 | |
| BA05.20-P-1005-02A | Screw/bolt, camshaft sprocket to stub shaft hexagon screw and washer assembly | M7X12 | Nm | - | 18 |
| BA05.20-P-1006-02A | Screw/bolt, camshaft sprocket to stub shaft internal torx bolt | M7 | Nm | 16 | 22 |
| BA05.20-P-1007-02A | Screw/bolt, camshaft bearing housing upper and lower section to cylinder head | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1008-02A | Screw/bolt, camshaft solenoid to front cover on cylinder head | Nm | - | - | |
| BA05.20-P-1009-02A | Center valve, pulse wheel/camshaft adjuster to camshaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1010-02A | Screw/bolt, auxiliary bearing cap to cylinder head | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1011-02A | Collar bolt, armature to stub shaft | Stage 1 | Nm | - | 5 |
| Stage 2 | ∠° | - | 90 | ||
CAMSHAFT, CAMSHAFT ADJUSTMENT
| Number | Designation | ENGINE 111 | ENGINE 152 | ||
|---|---|---|---|---|---|
| BA05.20-P-1001-02A | Screw/bolt, camshaft sprocket/stub shaft | Stage 1 | Nm | 20 | - |
| Stage 2 | ∠° | 60 | - | ||
| BA05.20-P-1002-02A | Center bolt, camshaft adjuster to camshaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1003-02A | Nut, camshaft sprocket to stub shaft | Nm | 65 | - | |
| BA05.20-P-1004-02A | Screw/bolt, camshaft bearing cap | Nm | 21 | - | |
| BA05.20-P-1005-02A | Screw/bolt, camshaft sprocket to stub shaft hexagon screw and washer assembly | M7X12 | Nm | - | - |
| BA05.20-P-1006-02A | Screw/bolt, camshaft sprocket to stub shaft internal torx bolt | M7 | Nm | - | - |
| BA05.20-P-1007-02A | Screw/bolt, camshaft bearing housing upper and lower section to cylinder head | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1008-02A | Screw/bolt, camshaft solenoid to front cover on cylinder head | Nm | - | 5 | |
| BA05.20-P-1009-02A | Center valve, pulse wheel/camshaft adjuster to camshaft | Stage 1 | Nm | - | 20 |
| Stage 2 | ∠° | - | 45 | ||
| BA05.20-P-1010-02A | Screw/bolt, auxiliary bearing cap to cylinder head | Stage 1 | Nm | - | 8 |
| Stage 2 | ∠° | - | 90 | ||
| BA05.20-P-1011-02A | Collar bolt, armature to stub shaft | Stage 1 | Nm | 5 | - |
| Stage 2 | ∠° | 90 | - | ||
CAMSHAFT, CAMSHAFT ADJUSTMENT
| Number | Designation | ENGINE 157 | ENGINE 271.8 | ||
|---|---|---|---|---|---|
| BA05.20-P-1001-02A | Screw/bolt, camshaft sprocket/stub shaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1002-02A | Center bolt, camshaft adjuster to camshaft | Stage 1 | Nm | - | 130 |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1003-02A | Nut, camshaft sprocket to stub shaft | Nm | - | - | |
| BA05.20-P-1004-02A | Screw/bolt, camshaft bearing cap | Nm | - | - | |
| BA05.20-P-1005-02A | Screw/bolt, camshaft sprocket to stub shaft hexagon screw and washer assembly | M7X12 | Nm | - | - |
| BA05.20-P-1006-02A | Screw/bolt, camshaft sprocket to stub shaft internal torx bolt | M7 | Nm | - | - |
| BA05.20-P-1007-02A | Screw/bolt, camshaft bearing housing upper and lower section to cylinder head | Stage 1 | Nm | - | 10 |
| Stage 2 | ∠° | - | 90 | ||
| BA05.20-P-1008-02A | Screw/bolt, camshaft solenoid to front cover on cylinder head | Nm | 5 | 8 | |
| BA05.20-P-1009-02A | Center valve, pulse wheel/camshaft adjuster to camshaft | Stage 1 | Nm | 20 | - |
| Stage 2 | ∠° | 45 | - | ||
| BA05.20-P-1010-02A | Screw/bolt, auxiliary bearing cap to cylinder head | Stage 1 | Nm | 8 | - |
| Stage 2 | ∠° | 90 | - | ||
| BA05.20-P-1011-02A | Collar bolt, armature to stub shaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
CAMSHAFT, CAMSHAFT ADJUSTMENT
| Number | Designation | ENGINE 271.9 | ENGINE 272 | ||
|---|---|---|---|---|---|
| BA05.20-P-1001-02A | Screw/bolt, camshaft sprocket/stub shaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1002-02A | Center bolt, camshaft adjuster to camshaft | Stage 1 | Nm | 90 | 145 |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1003-02A | Nut, camshaft sprocket to stub shaft | Nm | - | - | |
| BA05.20-P-1004-02A | Screw/bolt, camshaft bearing cap | Nm | - | - | |
| BA05.20-P-1005-02A | Screw/bolt, camshaft sprocket to stub shaft hexagon screw and washer assembly | M7X12 | Nm | - | - |
| BA05.20-P-1006-02A | Screw/bolt, camshaft sprocket to stub shaft internal torx bolt | M7 | Nm | - | - |
| BA05.20-P-1007-02A | Screw/bolt, camshaft bearing housing upper and lower section to cylinder head | Stage 1 | Nm | 10 | - |
| Stage 2 | ∠° | 90 | - | ||
| BA05.20-P-1008-02A | Screw/bolt, camshaft solenoid to front cover on cylinder head | Nm | 8 | - | |
| BA05.20-P-1009-02A | Center valve, pulse wheel/camshaft adjuster to camshaft | Stage 1 | Nm | - | 145 |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1010-02A | Screw/bolt, auxiliary bearing cap to cylinder head | Stage 1 | Nm | - | 8 |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1011-02A | Collar bolt, armature to stub shaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
CAMSHAFT, CAMSHAFT ADJUSTMENT
| Number | Designation | ENGINE 273 | ENGINE 276 | ||
|---|---|---|---|---|---|
| BA05.20-P-1001-02A | Screw/bolt, camshaft sprocket/stub shaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1002-02A | Center bolt, camshaft adjuster to camshaft | Stage 1 | Nm | 145 | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1003-02A | Nut, camshaft sprocket to stub shaft | Nm | - | - | |
| BA05.20-P-1004-02A | Screw/bolt, camshaft bearing cap | Nm | - | - | |
| BA05.20-P-1005-02A | Screw/bolt, camshaft sprocket to stub shaft hexagon screw and washer assembly | M7X12 | Nm | - | - |
| BA05.20-P-1006-02A | Screw/bolt, camshaft sprocket to stub shaft internal torx bolt | M7 | Nm | - | - |
| BA05.20-P-1007-02A | Screw/bolt, camshaft bearing housing upper and lower section to cylinder head | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1008-02A | Screw/bolt, camshaft solenoid to front cover on cylinder head | Nm | - | 5 | |
| BA05.20-P-1009-02A | Center valve, pulse wheel/camshaft adjuster to camshaft | Stage 1 | Nm | 145 | 130 |
| Stage 2 | ∠° | - | - | ||
| BA05.20-P-1010-02A | Screw/bolt, auxiliary bearing cap to cylinder head | Stage 1 | Nm | 8 | 8 |
| Stage 2 | ∠° | - | 90 | ||
| BA05.20-P-1011-02A | Collar bolt, armature to stub shaft | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
CAMSHAFT, CAMSHAFT ADJUSTMENT
| Number | Designation | ENGINE 278 | ||
|---|---|---|---|---|
| BA05.20-P-1001-02A | Screw/bolt, camshaft sprocket/stub shaft | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||
| BA05.20-P-1002-02A | Center bolt, camshaft adjuster to camshaft | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||
| BA05.20-P-1003-02A | Nut, camshaft sprocket to stub shaft | Nm | - | |
| BA05.20-P-1004-02A | Screw/bolt, camshaft bearing cap | Nm | - | |
| BA05.20-P-1005-02A | Screw/bolt, camshaft sprocket to stub shaft hexagon screw and washer assembly | M7X12 | Nm | - |
| BA05.20-P-1006-02A | Screw/bolt, camshaft sprocket to stub shaft internal torx bolt | M7 | Nm | - |
| BA05.20-P-1007-02A | Screw/bolt, camshaft bearing housing upper and lower section to cylinder head | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||
| BA05.20-P-1008-02A | Screw/bolt, camshaft solenoid to front cover on cylinder head | Nm | 5 | |
| BA05.20-P-1009-02A | Center valve, pulse wheel/camshaft adjuster to camshaft | Stage 1 | Nm | 130 |
| Stage 2 | ∠° | - | ||
| BA05.20-P-1010-02A | Screw/bolt, auxiliary bearing cap to cylinder head | Stage 1 | Nm | 8 |
| Stage 2 | ∠° | 90 | ||
| BA05.20-P-1011-02A | Collar bolt, armature to stub shaft | Stage 1 | Nm | - |
| Stage 2 | ∠° | - | ||