Notes on installing camshaft bearing bridge - AH05.20-P-2000-01BV
ENGINE 113.960
Pay attention to the following notes before installing the camshaft bearing bridges:
Lubricate camshaft bearings.
- Camshafts must not be replaced individually for tolerance reasons.
- If the camshaft bearing bridge is damaged, replace the cylinder head complete with the camshaft bearing bridge.
- The bolts M 7x84, 7x90 and 7x120 must always be replaced.
- The bolts M 7x84, 7x90 and 7x120 may not be reused.
- Pay attention to tightening torque, loosening procedure and tightening procedure of the bolts.