Remove/install right engine mount - AR22.10-P-1102MEX
ENGINE 780.993 in MODEL 451.390/392/490/492
| Risk of death when touching components on vehicles with high-voltage on-board electrical system | Do not touch components and open lines of the high-voltage on-board electrical system. Persons who wear electronic implants (e.g. cardiac pacemakers), must not carry out any work on high-voltage on-board electrical systems. | AS54.00-Z-0001-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Note on high-voltage on-board electrical system | AH54.00-P-0010-01A | ||
| Remove/install | |||
| 1 | Remove transmitter key and mains plug | ||
| 2 | Remove interior flap above engine | AR88.40-P-1100-03MCC | |
| 3 | Support drive electric motor with hydraulic floor jack | Use suitable protective base. Damage can occur on the drive electric motor otherwise. |
|
| 4 | Remove cable ties (4) and place electrical line to one side | ||
| 5 | Remove screw/bolts (2) | *BA22.10-P-1018-01M | |
| 6 | Remove screw/bolts (3) | *BA22.10-P-1006-01M | |
| 7 | Remove engine mount on the right (1) | ||
| 8 | Install in the reverse order |
ENGINE MOUNTS, ENGINE SUPPORTS
| Number | Designation | ENGINE 780.993 | |
|---|---|---|---|
| BA22.10-P-1006-01M | Screw/bolt, right engine mount to integral carrier | Nm | 56 |
ENGINE MOUNTS, ENGINE SUPPORTS
| Number | Designation | ENGINE 780.993 | |
|---|---|---|---|
| BA22.10-P-1018-01M | Screw/bolt, right engine mount to right engine support | Nm | 70 |