Remove/install carrier for engine mount - AR22.10-P-1001MCU
ENGINES 132.910 in MODEL 451.3/4
| Remove/install | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1 | Raise vehicle with vehicle lift | ||
| 2 | Support engine at oil pan using transmission jack | ||
| 3 | Remove screw/bolts (2) for front engine mount carrier (1) on cylinder crankcase | *BA22.10-P-1013-01M | |
| 4 | Remove bolt (3) for torque support on front engine mount carrier (1) | *BA22.10-P-1011-01M | |
| 5 | Remove screw/bolts (4) for front engine mount carrier (1) on transmission and remove front engine mount carrier (1) | *BA22.10-P-1012-01M | |
| 6 | Install in the reverse order |
ENGINE MOUNTS, ENGINE SUPPORTS
| Number | Designation | ENGINE 132.9 | |
|---|---|---|---|
| BA22.10-P-1011-01M | Screw/bolt, torque support to front engine mount carrier | Nm | 115 |
| BA22.10-P-1012-01M | Screw/bolt, carrier for front engine mount to transmission | Nm | 23 |
| BA22.10-P-1013-01M | Screw/bolt, carrier for front engine mount to crankcase | Nm | 56 |